车辆空气管道仪表盘安装支架 Clio IV型号

Air vent Gauge mount. Clio IV

2023-06-21 02:53:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Quick design of an air vent mount for the Autool X60.

Sketch is rough and has some gaps but will work fine.
This design allows for a tilted gauge towards the driver's side for better view even on sunny conditions,while still utilizing the air vent.

TO INSTALL
Remove the entire air vent, remove the two fins and install the 3d printed part. A small portion of the honeycomb on the rear has to be cut for the USB wire to pass through.
Pop back in place, connect the gauge and secure with some double sided tape or medium strength glue.
You also have to cut the 3 notches on the bottom of the gauge in order to fit.

I passed the OBD2 wire through the center console, under the steering column and then through a gap next to the air vent.
I also used zip ties to secure the wire tight.

SUITABLE for Renault Clio 4, and various Renault models .

Beware, of outside temperature as well as car's heating system temperature , PETG,ABS,ASA is recommended.

Feel free to post remixes and makes.

Have fun!

EDIT
I also made a second version that features a honeycomb-like design instead of a cross and a cut out on top for easier access to the button.Also added one for 62mm Gauges, havent test fitted it tho