联合轨道发射联盟Delta IV重型火箭1:60比例模型

ULA Delta IV Heavy 1:60

2023-06-21 04:36:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A roughly 1:60 scale model of the United Launch Alliance Delta IV Heavy.

The 3 sections are glued together and connected via the 4x printed sidebooster_connectors. You might need to play around with the connectors dimensions a bit, depending on your printers tolerances.
I designed it for a BambooLab X1 Carbon, so the parts aren't devided by color.
You need a 3D Printer with a Filament Changer or you paint it afterwards. On the model are tiny indents in the Raceway-channels to mark the brown rings, that devide the white and orange segments.
To improve printing, I designed the lowest sections to be printed upside-down and be connected with the 9x printed booster_connector

If you decide to print it, please post a Make.
I'd also welcome any suggestions on what changes to make in order to make the model an easier print.