手表制造清洁篮子可堆放

Watchmaking Cleaning Basket Stackable

2023-06-21 05:44:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a watch movement parts or other small parts cleaning basket.

The 50mm diameter baskets are stackable and the assembly is held together with an M5 bolt through the last basket and an imbedded nut in the lid.
The mesh size is 1mm x 1mm so most small parts should be safe!

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
30
Notes:
The basket mesh prints well using Cura with 0.4mm line width and a well adjusted Z height.

When printing the lid an M5 nut must be inserted then the print reaches about 5.7mm - 5.8mm in height as seen in the picture above!
To do this simply check your Z height on the monitor and pause when it gets to around 5.7 to 5.8mm, depending on your print settings, drop the nut in and resume printing!

Each print takes around 1 hour depending on your settings.