Cup Holder - 无洒漏

Cup Holder - No more spills

2023-06-21 23:35:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

No more spills! The super-duper Cup Holder to protect your work environment from accidental spills. Holds the cup from leaning sideways or sliding.
Essential if you use beverages (coffee, tea, sodas etc) on your desk / work bench.

WARNING: Addictive! Once you use it, you will never feel safe again without it!

Printed in Cura with .4mm nozzle size and .4mm layer height, 4 wall line count, 4 top / bottom layers, 30% infill and Lines infill pattern. No supports needed.
144grams printed in Creality PETG for food safety

Specific size printed as shown in photos, is
Large: 110mm height, 125mm width with the base, 90mm internal diameter for tall glasses
Small: 75mm height, 125mm width with the base, 90mm internal diameter for coffee mugs / cups

Resize in Cura to your specs (inner diameter to fit your cup), leave 5-10mm slack for easier pick up, even more will still protect the cup from leaning sideways.