特斯拉Model Y HomeLink支架车库门开关器

Tesla Model Y HomeLink Bracket Garage Door Opener

2023-06-22 04:28:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Bracket to retrofit a HomeLink garage door opener into a 2023 Tesla Model Y. Remixed rhovey's bracket with the following changes:
1) Changed mounting position to more closely align with the actual Tesla bracket (from pmlody’s design https://www.printables.com/model/382187-tesla-3-homelink-bracket)

2) Reduced much of the bulk from original design to reduce signal interference

3) Tuned up a few of the joints to add stability

4) Added holes to accommodate a zip tie to help secure the module into the bracket (don't over-tighten the zip tie!)

Reference this video for the step-by-step process (module part number and bolt size included in the video description).
https://youtu.be/6_5_g_Wc75A
Installation and configuration took me only about 20 min total, and did NOT require a Tesla technician. YMMV.

Print settings:
Supports enabled
55% infill
PETG filament to increase durability and heat tolerance
.20 resolution