Mobula 6HD改装为75mm tinywhoop
Mobula 6HD conversion to 75mm tinywhoop
2023-06-22 20:35:49
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Hey, thanks for clicking on this thing. This is a 3D model for converting the Mobula 6HD to 75mm.
Note: This model is edited by me. But someone else made the base. Also, it works fine and is pretty strong even when printed in PLA but when taking it apart after a few weeks things might fall apart.
What you need:
- Screw that came with the mobula 6HD and screws that are on it.
- 40x40mm propellors with 1mm shaft.
How to build:
- Put in all motors and screw them in.
- Put in the grommets in the frame with the flight controller. (Be sure to have the right FC direction)
- Put the runcam split 3 lite onto the grommet
- Put the ducts onto the runcam split. (Be sure your battery connector, VTX antenna and rx antenna is positioned correctly.)
- Put the canopy onto the ducts.
- Screw everything tight. (Using the old screws and spare screws.)
Tags
License
CC BY
Mobula 6HD conversion to 75mm tinywhoop
by 3Djeden is licensed under the Creative Commons - Attribution license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
最新模型
-
智能路甲车通风控制杆2024-05-08 -
Rancilio Silvia 58mm Portafilter Hook2024-05-08 -
适用于任何步进电机的弹簧联轴器2024-05-08 -
UL-野营椅（280克）2024-05-06 -
垃圾桶固定扣2024-05-06
最热下载
-
Gyro Air旋转空气模型2023-03-26 -
沃帕尔六足行走机器人2023-03-26 -
3D机器人手臂模型2023-03-26 -
塑料扣（3D打印无需支撑设计）2024-05-08 -
Enders 3版控制面板2024-05-08