Din Rail固定支架
Din Rail mount for Adafruit arcade and NeoKey boards and buttons
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A Din Rail mount for four cherry mx style buttons using an Adafruit NeoKey 1x4 QT I2C breakout boards and four 30mm arcade buttons using an Adafruit button controller.
You will need to print two tabs for this design.
They can be found at: https://www.thingiverse.com/thing:3401942 or https://www.prusaprinters.org/prints/8512-din-rail-mounting-tab.
The NeoKey 1x4 QT I2C Breakout can be found at: https://www.adafruit.com/product/4980.
The four-button controller can be found at: https://www.adafruit.com/product/5296
This can be used with our dark box project instead of the two separate controls.
The project is documented here: https://www.instructables.com/Build-a-Simple-UV-Photography-Box/
or
https://www.instructables.com/A-Simple-Rotating-Stage-for-Photography-or-Display/
Tags
License
Din Rail mount for Adafruit arcade and NeoKey boards and buttons
by NotLikeALeafOnTheWind is licensed under the Creative Commons - Attribution - Non-Commercial license.
联系我们
热门推荐
-
LG冰箱抽屉滚轮锁 3D模型2023-06-22 -
ESP8266与OLED 1306案例分析2023-09-16 -
MOTU: 永恒之战 - 车辆大集合2024-03-27 -
Walksnail VRX型号天线支架2024-04-12 -
拳击手套帽2024-05-01
最热下载
-
Toyota 22RE发动机扩展套件2023-03-26 -
Arduino或5V继电器控制板固定架2024-04-02 -
俄亥俄州日全食针孔观察器2024-05-03 -
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21
最新模型
-
手指锯2024-05-08 -
Mini砂块旋钮2024-05-08 -
卡塔琳娜22型船模桅杆门2024-05-08 -
外部电机用鼓风机2024-05-06 -
Jenga盒子2024-05-06