激光切割机摄像头安装支架

web cam mount for laser cutter

2023-06-23 00:21:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Webcam Mount for Laser Cutter

This poroject is for a Logitech C930e webcam and ATOMSTACK B1 Enclosure

Required materials

Logitech C930e webcam
some filament for printing parts
4x lego 2780 bricklink
1x Whitworth 1/4 screw

Installation

Print the parts.
Install the LightBurn software on the computer .Follow the instructions provided with the software. (You probably done that already.)
mount the webcam into the webcam holder and use the second part and four Lego connectors to attach it to the handle of the lid
Connect the webcam to the computer and verify that it is correctly recognized and functional.
Launch the LightBurn software and ensure that the webcam is properly set as the input device for video monitoring.
Perform laser beam calibration using the functions and tools provided by the LightBurn software. Monitor the live video feed from the webcam and adjust the position and settings of the laser cutter to achieve the desired outcome.

Note

Before using any device, software, or performing calibration, it is important to carefully review and adhere to the safety guidelines provided with the laser cutter and its related components.