破碎点移动工具
Shatterpoint Move Tools
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Simple two part Star Wars Shatterpoint Dash and Advance move tools. Suitable for casual play or as backups for your original move measuring tools.
I printed without supports, then pressed together. Your printer needs to have pretty good tolerances. I found turning the two parts upside down and pressing the lower onto the upper to be the easiest way to assemble. It takes some pressure, don't be shy.
PETG may be more flexible than PLA, which may make it easier to assemble.
Print Settings
- Printer brand:
Prusa
- Printer:
Prusa Mk2
- Rafts:No
- Supports:No
- Resolution:0.15mm
- Infill:30%
Post-Printing
Assemble them upside down, press 'lower' part onto 'upper'. Requires good tolerances on your prints.
Tags
License
Shatterpoint Move Tools
by Mr_Disintegrator is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license.
相关内容
联系我们
热门推荐
-
双可调节蜂窝面板2023-03-26 -
1954年梅赛德斯-奔驰W196皮诺德比赛车壳体2023-03-26 -
3040 Wyse轻薄客户端支架2023-04-22 -
21700毫安电池单元保持架2024-04-06 -
洗衣精助理！（旧荷兰语）2024-05-01
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
GMX曲线支架支持GoPro安装（或轻型结构）2023-05-22 -
Dado - 立方体模型2024-03-24 -
Apple鼠标 - M0100 3D模型2024-03-25 -
沙箱建筑模型2024-05-08
最新模型
-
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
鞋撑2025-07-17 -
Yeezy Foam Runner Adidas运动鞋2025-07-16 -
原神优菈2025-06-27 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24