Ratta Supernote标准笔身3D模型

Ratta Supernote Standard Pen Body

2023-06-23 01:37:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

My Ratta Supernote pen was damaged and the outer body had to be replaced, while the core (the part that Ratta sells as refills) was still usable. I needed a part that would support the delicate core without damaging the copper coil near the tip.

The core goes inserted inside the 'pen_body' part. Then the 'pen_cap' encloses the tip. Finally I use regular duct tape to secure the two pieces together, and to provide a surface with good grip. I actually prefer this feel to the original pen.

This can be used to replace the outer body of a standard pen or to create custom Supernote pens using a refill.

Note: this is not compatible with the standard pen end cap, which I didn't use anyway because it was too loose.

Printed very well on a Prusa Mk3 with standard settings.