泳池泵轮体住房（沙滤器）Monzana/Deuba

pump wheel housing for pool pump (sand filter) Monzana/Deuba

2023-06-23 03:05:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

this is a replica of the impeller housing of my sand filter pump. In my case, this housing cracked and extremely much water leaked during operation.

Now with the replica I have no more problems.

The sealing ring, which is on the original part at the top of the flange, must be reused (or you buy a new one --> but the old one should be measured beforehand to be able to determine the new one exactly). The screws are also still used.

I used threaded sleeves for melting and melted them into the four holes. Thread size M5 is the correct one. Pay attention to tight fit, because a firm connection between pump and housing must be realized.

I used the following melting sleeves:
https://www.amazon.de/gp/product/B09B7F2XM3/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

My recommendation is to print the housing with ASA/ABS, which is very weather and chlorine resistant.

Also I recommend to define and adjust (take into account) the shrinkage compensation before the actual printing.