Too Many Bones: Gearloc存储盒盖

Too Many Bones: Gearloc Storage Tray Lids

2023-06-23 03:42:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These are sliding lids to accompany the Gearloc storage trays for the board game Too Many Bones. The storage trays have been posted separately (6090857). Each Gearloc has its own customized tray lid.

The lids latch into place on one side of the tray and will not slide off on their own. To release the latch, gentle pressure is applied at the open end which pushes out the latch point on the side. The tray then easily slides forward (see photo). The trays have a second set of slide rails on the bottom so that the lid can be put underneath out of the way when the tray is in use during the game (see photo).

Print Settings

Printer brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.8 mm
Infill:
100%
Filament brand:
Fillamentum Crystal Clear Transparent
Filament material:
PLA
Notes:
Extensive tuning of the slicer settings were done in advance to get the transparent filament to print as clearly as possible. The lids were printed face down on a Creality carborundum glass plate to make the tops nice and smooth and improve the transparency.