SD & Micro SD Card Holder (10 Slot)

2023-06-23 03:58:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

3D Printable SD & SD Micro Card Holder - 10 Slot

General Model Information:

This model has been designed to comfortably hold a total of 20 SD cards (10 regular sized and 10 micro sized respectively) and has a maximum height of 20.28 mm, length of 43.25 mm and width of 42.50 mm.

Clearance for the card slots has been left at 0.25 mm. If you are having fitment issues adjust the scale of the model using your slicing softare to suit your needs.

Printing Instructions:

The optimum orientation for printing this model is to print it with the base flat against the bed and it is reccomended that a rigid filament be used.

The model shown in the photo image was:

Sliced in Cura 4.8.0
Printed on an Ender 3 with bed heating turned on @ 70 degrees celcius
Printer using silver 1.75mm diameter PLA filament with hot end set @ 210 degrees
celcius.
Layer height of 0.16mm and shell pattern set to lines.
Infill set to 100%.
Support material settings disabled.

Licence:

This model has been released under the Creative Commons - Attributive licence so feel free to share and remix to suit your needs. Please be respectful and provide attribution if you choose to modify/publish work based on this model.

It's very satisfying to see your work being utilized, so if you enjoyed using the design, please do share with others who may find it useful and if you can it would be much appreciated if you could share an image of your print on thingiverse to help the design reach more people.

If you feel generous and want to support my work, a tip is always welcomed.

Happy Printing!