ASCO 型号线圈线缆盒

ASCO Solenoid wire box

2023-06-23 05:08:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

We use these Asco solenoids here at my job and I needed to replace an older one we has that was the same part number (302014 rebuild kit #, and JSF8262G002 Catalog No.) The only problem, was the older solenoid came with a box made onto the bottom to make the wire connections in, and this one didn't, so I designed one. This is a pretty straight forward installation. Just get a couple of the wire clamps that are threaded that have the 2 screws on them that tighten down on the wire and use one to screw from inside the box, up into the solenoid to hold it to the box. Use the other on your incoming wire and use it to hold the wire to the box like you do any other electrical box. (Hope this makes sense). I included a picture so hopefully this makes a bit more sense.