Trotec PAC 3000 X A+ 双管适配器 3D模型

Trotec PAC 3000 X A+ dual hose adapter

2023-06-23 06:45:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Second hose for Trotec PAC 3000 X A+

Custom intake for Trotec PAC 3000 X A+ or Trotec PAC 3500 SH monobloc air conditioners, allowing a second hose to be connected.

This significantly increases the efficiency of the unit.

The custom intake can be installed without any modification to original parts.
It features an instance of Trotec's hose mounting system, so you can just buy a second hose and connect it. Alternatively, you may also print the hose-screw adapter, allowing you to connect a generic "150mm" hose, such as this one from amazon.

Print Settings

Printer brand:
VoronDesign
Printer:
Voron2 300
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
enough to support top layers, maybe 8%
Filament brand:
any
Filament color:
any
Filament material:
PETG or ABS (heat resistance)
Notes:
intake_plate_top likes to warp, use a skirt.

Custom Section

What to print

Intake plate

If you have a large printer: trotec_intake_plate_complete

If not: trotec_intake_plate_bottom and trotec_intake_plate_top, and superglue the pieces together afterwards.

Nubsi

2x trotec_nubsi

These go into the intake_plate, allowing it to latch in place.

Screw adapter (optional)

If you want to connect a "150mm" flexible hose.
trotec_screw_adapter and trotec_screw_adapter_hook
You need to superglue the hook onto the adapter.