树莓派摄像头箱设计

Yet another Raspberry Pi + camera housing

2023-06-23 07:36:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

An outdoor housing and wall bracket for a Raspberry Pi 1 Model B and a V1.3 NoIR camera.

Why this one?

Needed an outdoor camera, Had an original Raspberry Pi Model B and camera module. Wanted something weatherproof, durable and simple, with a ball mount.

Fasteners needed for assembly:

8 x M3 nuts
8 x M3 bolts
3 x M5 nuts
1 x M5 bolt

A piece of acrylic or glass for lens cover. Cut to size. 49.8mm x 49.8mm X 2.5mm.

Used hotmelt glue to mount the camera board due to lack of tiny nuts and bolts, but the holes are there.

Before assembly:

Drop the M3 nuts into recesses in top and bottom shells. Tighten them in position with a bolt. Secure them with a bit of glue as they tend to fall out. Remove the screws. It will make assembly easier.

The top shell slides over the bottom shell.

Self vulcanising rubber tape works nxa to seal up the cable entry hole and makes nice plugs.

Print Settings

Supports:
Yes
Resolution:
0.2 mm layer 0.4 mm nozzle
Infill:
50%
Filament brand:
SA Filament
Filament material:
PLA+
Notes:
The STL objects are provided in their assembled orientation. Parts will need to be rotated to suit your printing style, and will need supports.

Tags

security camera

License

CC BY

Yet another Raspberry Pi + camera housing
by m_a_d_r_y_n is licensed under the Creative Commons - Attribution license.

树莓派摄像头箱设计

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

RGZ-89 3D模型
2023-03-27
TBS Source One v3 - 英雄形象支撑架构
2023-05-13
基础巨人模型
2024-03-17
Gue'Ron'Vesa MK 2 by El Mutanto
2024-04-03
嵌入式微流体混合器
2024-05-01

最热下载

最新模型