RV空调窗户通风装置

Air Con Window Vent for Motorhome

2023-06-23 19:42:42

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

We bought an older motorhome with no air conditioning.

I found a small 5000BTU unit that consumes about 600w on Amazon that fits nicely between the driver and passenger seats so it's not in the way. The hose is long enough to reach either of the front windows but needs something to secure it.

I found a model on here for a Velux window and modified that to start with but the surface area of the outlet on the adapter was significantly less than the surface area of the round hose which cause the air con unit to overheat.

I modelled this one completely from scratch so that the outlet surface area matches the hose surface area.

This has some small clips on the bottom edge. Our hose isn't one of the flimsy ones with a spiral of wire, it's one that kind of concertinas up and stays like it. It has a solid plastic ring at the end which is what this adapter clips onto. The hose we have is 150mm in diameter.

I printed this with the rectangular outlet flat on the bed and used normal supports. On the Bambu, these were very easy to remove. YMMV on other printers.