3D模型：收纳盒设计

Bins for TERRY Pro organizer

2023-06-25 02:39:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A wide variety of bins that will fit into the TERRY Pro organizer. I've tested them on the Pro 16, but it looks like they might also work for the Pro 24.

In USA, the TERRY Pro 16 organizer was once sold in The Container Store, and might still be found at Amazon: https://www.amazon.com/TERRY-Pro-16-Organiser-Box/dp/B00AF9NHEC

For the file names, (i.e. 2x1), the first number is the bin width (6 can fit in each row of the TERRY 16) and the second number is the height (2 can stack on top of each other).

Variations of these bins have additional features:

Labels
Scoop bottoms to assist in pulling out small items
Dividers

These bins are based on the Gridfinity system. They are basically scaled up from 42mm to 61mm square and have bumpers added to fit perfectly into the TERRY organizer.

I printed mine in PLA using a 0.4mm nozzle, 0.20 resolution. I haven't tested extensively, but I'm getting good results with a gyroid infill of 10%.

Fliaments used in photos: