小提琴弓挂钩

Bow violin holder

2023-06-25 04:35:45

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The forearm socket is a rebuilt Kwawu2 socket, and the shoulder mount is also made of Kwawu2. The end for the wrist screw has been changed so that a 16mm tube can be attached instead of the screw.
The socked is made as short as possible, then the screw handle is cut off and I constructed a 16 mm pipe holder in its place.
The second element is the bow holder. It consists of two parts. A proper bow holder, fits a violin bow, and a 16mm tube holder attachment. The bow holder must be printed from a flexible material, I print with Fiberflex40d (Polish manufacturer, Fiberlogy), additionally two M4 and two M6 screws are needed (or M8, I don't remember exactly). M4 are used to clamp the bow in the holder. M6 connect the handle and tube mount. The handle cannot be attached to the tube mount permanently, it must move freely. For this reason, a collimator must be mounted on the soundboard of the violin, otherwise the bow will move incorrectly along the strings.
The bow holder is designed to fit a 4/4 size violin bow, but the smaller one should also fit snugly. The collimator is from thingiverse https://www.thingiverse.com/thing:4594203
The attachment to the 16 mm tube is universal, but you have to manually adjust it to the funnel, I haven't figured out how to do it parametrically :-)

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0,2
Infill:
20-30%
Filament brand:
Any
Filament color:
any
Filament material:
Fiberflex, PLA, PetG
Notes:
BowViolinHolderFlex - Fiberflex 40D from Fiberlogy
Other models - PLA, PETG, ABS - any wiil be ok