花瓶 798

Vase #798

2023-06-25 06:14:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This pen, or anything else, cup can be printed in vase mode, or spiralize outer contour in cura, or printed in normal mode. You can uncheck spiralize outer contour to print in normal mode, set top layers to 0, set infill to 0%. Bottom layers set to 3 or more. Set walls to 1 or 2 or more for a more sturdy vase if not in vase mode. Can be scaled to fit your needs. The vase in the photo shows vase not scaled at 100% of the stl file at 78mm wide for X and Y and Z is 112mm tall. It has not been tested for being watertight and probably isn't printed in vase mode. If you make it, please post a photo, I'd like to see your print!

All my designs have a copyright, you may not download and sell them.

Tips are appreciated!

Enjoy...

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
0
Filament brand:
any
Filament color:
any
Filament material:
pla
Notes:
The stl file is NOT hollow. Be sure and check your slicer for printing a hollow vase.

Designed using Fusion360