重力卡拉米特 - 无螺丝设计

Gravity Karambit - No Screws!

2023-06-25 08:43:24

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Gravity Karambit, inspired by the Exo K. Tired of every folding style knife needing screws that you don't have access to? That's the entire reason I designed this. All it needs is a few blobs of superglue and it's ready to go, it's a very simple build.

Depending on your hand size I would recommend scaling the parts from 90% (Small) to 100% (Large), I personally use it around 93% of original scaling. Scale all ''optional'' parts to the same scaling value.

UPDATE 3 (1k Downloads Belt Clip) - 09/07/2023

I wasn't originally planning on adding anything else to the knife but after adding the optional latch the rear of the knife looked empty. So I've added another part, a belt clip. Supports are recommended and if you find it too flimsy then try scaling it up to 5% larger than the scaling used for the rest of the knife parts. Once again this is just another optional addition to install if you want to. Big thanks to everyone for the support in the last 2 weeks!

UPDATE 2 (Locking Mechanism) - 28/06/2023

Optional latch / locking mechanism added! The Gravity Karambit can now be locked in a open or closed position with the simple addition of 4 tiny extra parts. Completely optional but makes a big difference, just remember to keep the scaling consistent.

UPDATE 1 (Quality Improvements) - 25/06/2023

Tolerances are now slightly tighter creating less wiggle room. Edges and blade are also sharper making it easier for the blade to slot into itself. Finger grip removed. Any previous instability issues should be fixed. Simple locking mechanism coming soon.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Filament brand:
Creality
Filament material:
PLA
Notes:
Scaling options 90% (Small hands) 95% (Medium hands) 100%+ (Large hands). Be aware that the lower the model is scaled, the higher the printing error chance. Going below 90% is not recommended.