LD1125H毫米波3D模型墙盒封装

LD1125H mmWave Enclosure Wall Box

2023-06-25 08:58:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a wall box/enclosure for the LD1125H mmWave sensor. It holds the mmWave sensor and a NodeMCU ESP32. The enclosure is approximately a 60mm cube.

I've also included a few files with the face of the cube cut at 25, 30, and 35 degree angles, so that the sensor faces at a downward angle when mounted on a wall.

There is also a corner piece that can be printed to make the box fit in the corner of a wall, it attaches to the back of the box with four M3x10 screws (holes are not threaded, just let the screws self-tap its own threads into the holes).

I have also included the .f3d Fusion 360 design file, so feel free to make modifications if needed (my design skills aren't the best, so the Fusion 360 design timeline is a bit messy, sorry).