JLab GO Air钥匙扣配件盒滑动式开启设计

JLab GO Air keychain case with sliding open

2023-06-25 17:33:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of the original case that is scaled up to 102%. It also has a deeper opening on the side so the earbuds can be put in or removed easier. It only covers enough of the earbuds to stop them from falling out of the case but not so much that it's a nuisance to get them out which was my problem with the original model. Along with that, it has a key chain on the back to attach easier

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.16
Infill:
doesnt matter because everything but the keychain piece all prints as a wall
Filament brand:
mika3d
Filament color:
purple
Filament material:
silk pla
Notes:
I recommend printing it with the opening facing up and using tree supports. This ensures that the sides are smooth and the print time is reasonable. One problem this causes is that the key chain bit is covered completely by the supports. for this print with 0% support infill and 100% roof density and remove the supports carefully and in pieces.