拖车手柄（用于拖车动作）

Tow Handle for Tow Boogie

2023-06-25 18:21:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Single handed tow handle for tow boogie.
Designed to be filled with polyurethane expanding foam - it won't be strong enough without the foam.

Low drag so that it doesn't get pulled under water as much as a regular ski tow handle, so that you can reach down and grab the tow handle while pumping the foil. Reduced frontal profile with tow line going through the handle, rather than having a larks head/knot on each end of the handle. Rounded ends, so it won't dent your board. Lightweight - 20g plus foam.

Fill it with the same 2-part expandable foam you might use to make a bremote.

Includes support structure, designed to be printed at a 45 degree angle to improve strength. Print in PETG. No supports should be used in the slicer.