莉丽戈 T显示版S3 AMOLED外壳
Lilygo T Display S3 AMOLED Case
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Lilygo T Display S3 AMOLED Case
Rev 1 - 08Sep23 gcode file for the top added which has been generated using PrusaSlicer 2.6.0.
Some users have experienced issues with printing the switch tabs in Cura so this file may help.
Slimline case for the Lilygo T Display S3 AMOLED with header pins.
Screwless design that clips together firmly.
A spudger maybe required to spring one side to help the back to clip in.
It's a snug fit.
Likewise the spudger is needed to get it apart.
I've included a few variants of the case to suit most needs
Top with USB C and Reset holes
Top with USB C. Reset and Stemma QT connector holes
Bottom with gpio pin header slots
Bottom with no slotsAll printed in PLA with no supports required.
I've included STEP files as well as STL to make it easier to modify if required.
Hope this helps someone.
Print Settings
- Printer brand:
Prusa
- Printer:
i3 MK3
- Rafts:Doesn't Matter
- Supports:No
- Resolution:0.2MM
- Infill:15%
- Filament brand:
Prusa
- Filament color:
Yellow
- Filament material:
PLA
License
Lilygo T Display S3 AMOLED Case
by jeepers01 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
联系我们
热门推荐
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
DRIOD BODY R2D2 Star Wars2023-03-26 -
皮卡丘游乐场行李牌2024-03-15 -
HTC Vive控制器支架2024-05-03 -
可调节臀部垫（适用于HW97K）2024-05-06
最热下载
-
Valorant 杰特的姿态2023-03-26 -
Gun4IR 光枪侧边按键改装模块｜3D打印机械开关支架2023-05-23 -
拒绝的手势2024-04-19 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
HGX lite v2支架2025-07-18
最新模型
-
罗技K400键盘壁挂式支架2025-07-27 -
鞋撑2025-07-17 -
泡泡底拖鞋2025-07-17 -
碧奇公主；桃子公主；水蜜桃公主2025-07-16
