鸭巢型阀盖
Duck Dome valve cover
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I received a Duck Dome as a gift but it didn't have a cover for the valve. So... I made one. This fits the valve on the 48"x36" pillow but I expect they all use the same valve. At the very least this will keep the bugs out. It is by no means intended to hold in pressure.
Here is the Duck Dome -https://duckcovers.classicaccessories.com/catalog/product/view/id/945/s/rectangular-duck-dome-airbag-48-36-inch/category/27/
And you can remix the design in Tinkercad -https://www.tinkercad.com/things/5AMfCOd6wEH
Print Settings
- Printer brand:
Anet
- Printer:
A8
- Rafts:No
- Supports:Yes
- Resolution:normal / 0.15mm
- Infill:15%
- Notes:
The supports are only there to support the portion of the cap that is keyed to the flange on the valve. In sure I chose 15% support density and lines rather than zig-zag.
Tags
相关内容
联系我们
热门推荐
-
紧急哨声器 小型超响2025-06-18 -
车身RC 1/102023-03-26 -
Bosch 电动车电池固定架 / 充电站2024-04-16 -
地球宫2024-04-24 -
2005-2009款福特野马S197倒车摄像头支架3D模型2024-04-28
最热下载
-
凯弗·鬼魂追踪者2024-01-18 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
用于RRD通用型70182电机的mayrc maytech桅杆夹2024-04-20 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29
最新模型
-
WIZARD STAFF (konosuba) 中文名：巫师法杖 3D模型2024-05-08 -
轻量级螺旋桨2024-05-08 -
空气箱盖2024-05-08 -
宜家 手把导向器2024-05-08
