鬼猎人 FA-4919 型号截面单元

Ghostbusters FA-4919 Cross sectional unit

2023-06-27 17:36:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

files to replicate the FA-4919 cross sectional unit on top of the Ecto-1 (Ghostbusters 1984) and Ecto-1A (Ghostbusters 2 1989).

Using Thingiverse to increase visibility, remaining files available at:
https://github.com/OfficerSkidmark/FA-4919-Cross-Sectional-Unit

The project started in 2021, I wanted to install this unique piece of equipment onto my ecto, Ecto XV, after some time of looking at options I decided to make my own. this was made using many photos available online of the original ecto 1's roof rack and sketches that were available in the Ghostbusters Hanes service manual. I attempted to reach out to Texas Instruments and later Raytheon (current owners of the TI Aerospace division) to try and find more accurate mechanical drawings of this device with no luck. therfore i cant guarentee this is 100% accurate due to my limited resources. this is still a WIP as i have yet to build this version of the cross sectional and cant guarentee perfect fit up. two versions of the plate are in these files. one is a flat plate like what my prototypes were like, and one that has bent tabs like what the original unit had. the bent tabs add difficulty in the manufacturing process so only specific outfits like Oshcut who offer sheet metal bending can make this. obvioulsy the bent faceplate is more expensive but the flat one is still available.(STLs have also been made available, they just arnt entry level printer friendly)

The decals that were used are from fannstar with custom cut dataplate and dial decals. Contact the shop prior to ordering and request "the Oval Data plate scaled to 1 5/8 wide & a 7mm round center hole cut out of the dial decals" (https://www.etsy.com/listing/834360097/texas-instrument-box-clear-and-misc)