猎豹2A4坦克3D模型

Leopard 2A4

2023-06-27 17:37:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a model of the Leopard 2A4 tank. It is a German MBT that came about in the early 1980s. To create the model, I used a variety of online sources. The game War Thunder was also helpful.

Print Settings

Printer brand:
Artillery
Printer:
Artillery Sidewinder X1
Rafts:
No
Supports:
Yes
Infill:
10
Notes:
This model has three files, or pieces, that will be easily assembled once printing is finished. For the hull, try printing it in any way that works best for you. No matter what, due to poor design (oops), support material will get messy. Hopefully, it's better for you. The turret is simple enough; support material or rafts aren't necessary. To print the cannon, orient vertically and use rafts. I found anything under 0.2 will work fine.

For reference, the length of the cannon should be 102.3 mm total. If that is too big or too small, scale all parts evenly.