Oculus Quest 2权重分析模型

OQ2 Oculus Quest 2 Weighter

2023-06-27 18:24:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Most of parts printed with support from bed or without them.

Basic setup: (Bot_Part + Top_Part + ScrewTall + simplestHolderWithHole) x2
you can put whatever weight inside "simplestHolderWithHole".

Setup with casted weight: (Bot_Part + Top_Part + ScrewTall + Holder_disc) x2 + "PlasterCast_v2_taller + CastChamfer"
Only fore those who knows what their doing, 345g of hot lead is not a joke.

345g casted weight is critical, and not recommended. Extra sudden move with such weight may damage your controller.

Setup with glued holder: (Bot_Part + Top_Part_NoMid+ simplestHolderNoHole,) x2
Screw "Top_Part_NoMid" with "Bot_Part" and then carefully glue "simplestHolderNoHole" to "Top_Part_NoMid".

Print Settings

Printer brand:
Wanhao
Printer:
Duplicator 4
Rafts:
No
Supports:
No
Resolution:
0.4mm
Infill:
15%
Filament brand:
Plexiwire
Filament material:
ABS / PLA
Notes:
Printed with skirt.
Line width 0.5mm - helps to print Srew thread and BotPart without supports.

BotPart does not require support.
Screw require supports only from bed - printed orientation - thread to top.
Top Part and Plaster Cast printed with supports from bed, rounded side to the bed.