YAWN 自膨胀式双人空气床高端吹风机型号

YAWN Self Inflating Double Air Bed Deluxe Impeller

2023-06-27 21:41:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Replacement Impeller for Yawn airbeds (Original impeller appears to have a common fault where it falls to bits).
Specifically the 'YAWN Self Inflating Double Air Bed Deluxe' but might fit others, tried and tested on a faulty shop returned unit. Faff to open the motor itself but works a treat.

Will need a 2 part epoxy for sufficient adhesion to the motor shaft!

Printed in PLA, mine needed a bit of post-processing as my retraction was off but should be fine if your printer is dialled in properly.

At max quality the teeth on the through hole for the shaft might actually grip well enough to not need glue but i've not tested that!