Halo系列能量剑全尺寸3D模型

Halo Energy Sword - Full Scale

2023-06-28 01:23:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This full-scale model of the Halo Energy Sword uses the circuitry from the original file, but this version is scaled up and also has stronger connection points with the handle. This is meant to be printed on a LARGE printer, 350x350 or larger.

Notes:
Blade files are to be printed twice, and one flipped to fit other side of the handle.
The flats where the LEDs get glued to are slightly less that 10mm, so they will need to be angled slightly to allow for the blade to fit properly. During my build, I had them hot glued into place and then plastic welded the outside of the blade.
Nuts and bolts are required to create secure connection points. the Bill of Material is listed below.
The wiring has channels it needs to fit into when the handle is completely collapsed. The handles also have a widened channel right before the edge of the handles where the blades meet to account for any quick-disconnect clips in the wiring. Quick-disconnect clips could help for when needing to disassemble and transport energy sword.
Again, these files are meant for printers with a printable area 350x350 or larger.

These are the items needed outside the printable files:
4x M6x20mm button head bolt
4x M6 nut
4x M3x8mm button head bolt
4x M3 nut
Plus any other electronic items listed from the original file