Honda VTR1000F 12V到USB支架
Honda VTR1000F 12V to USB bracket
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
This was created to fit a generic USB cigarette lighter replacement USB adapter. The one in specific i used was purchased from Amazon, ASIN# B0C1RPZ6KQ, but i'm sure will work for others of similar design.
12VUSBMount V2_metal bracket.stl should not be printed but instead used as a template for making the bracket from a piece of steel. I used 1.7mm thick spring steel. This adapter fastens to the bracket using a M6X8mm button head fastener and a M6 nut that is recessed in the adapter. The bracket and adapter are then fastened to the triple tree using the M8 fastener for the right strut.
Print Settings
- Printer brand:
Creality
- Printer:
CR10S PRO
- Rafts:No
- Supports:No
- Resolution:.16
- Infill:15%
- Filament brand:
Polymaker
- Filament color:
natural
- Filament material:
ASA
- Notes:
Nothing special, I printed it upside down to avoid supports in the nut pocket
Tags
License
Honda VTR1000F 12V to USB bracket
by Z_Karma is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
最新模型
-
惠普712扩展槽盖固定架用于SD卡扩展线2024-05-08
-
Pokemon Go 社区日第86次 # Bounsweet 鸣泉2024-05-08
-
PET瓶盖3D模型设计2024-05-08
-
微缩小木屋2024-05-06
-
4" Duct to Flat Surface2024-05-06
最热下载
-
钥匙扣2023-03-26
-
通用型1/10比例底盘 - DKS基础款2023-03-26
-
21700毫安电池单元保持架2024-04-06
-
Woods Mower 30922 护盾保持者2024-04-24
-
花环戒指2024-05-08