Caddx 花生鼻部设计 for 原子级 RC 鲸鱼系列
Caddx Peanut Nose for AtomRC Dolphin
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a custom nose for the AtomRC Dolphin. It is build to host a Caddx Peanut.
The nose is comprised of three parts. First part, the nose base, is attached to the plane body. The second part is the main nose section. These two parts should be printed from PLA plus. The third part, which host the Peanut, should be printed using TPU (this way it allows pushing the record button straight by pushing the nose. very convenient).
The main nose part is connected to the base by two 6mm x 40mm carbon fiber rods.
The front part connects to the main part via four 3mm x 20mm carbon fiber rods.
I added the possibility to use magnets as well, but I found them un-needed.
Tags
License
Caddx Peanut Nose for AtomRC Dolphin
by EitajeFPV is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
Voxelab Aquila可连接床手柄2023-03-26 -
宝马E60 E61猪鼻风扇通风衬垫2023-08-03 -
Saab 7585540 3D模型2024-03-25 -
可调节臀部垫（适用于HW97K）2024-05-06 -
FPV遥控纸飞机（机身）STL 3D模型2025-09-16
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
「春雷」弹壳弹出式泡沫飞镖发射器（进行中）2023-03-26 -
Flex Dino钥匙链2023-03-26 -
索尼NP-FW50电池专用外壳（5个装）2024-04-24
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
任意立方体活动关节的一体打印外星人2025-07-19 -
龙珠孙悟空，无需支撑2025-07-19 -
弹弓HGX-FRAME V1A2025-07-18 -
兔女郎半身像2025-07-15