MOTO手机支架 HUAWEI Mate 20X
MOTORCYCLE PHONE MOUNTS HUAWEI MATE 20X
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Raw model of a phone holder for a Huawei Mate 20x
In the photo is the first prototype, in testing phase, to ensure that it resists road vibrations and wind.
The model already has some updates to facilitate 3D printing.
Next model will no have a ball joint
The mount uses 2 Head Cap M5x16 screws and nuts
Print Settings
- Printer brand:
Artillery
- Printer:
Artillery Sidewinder X1
- Rafts:Yes
- Supports:Yes
- Notes:
The connector must be printed horizontally, as shown in the photos. Otherwise, it will break when mounted on the ball joint.
All the parts were sliced with PrusaSlicer with Optimal settings for a Artillery Sidewinder X2
How I Designed This
Custom Section
License
MOTORCYCLE PHONE MOUNTS HUAWEI MATE 20X
by jlgilberto is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
40×0型风扇安装件（适用于E3DV6型号散热片，中心对齐）2023-05-28 -
锁匠工具套装GT2023-06-01 -
Panasonic Lumix GX8 前置旋转环2024-03-21 -
Flashforge Adventurer 3 HEPA 空气过滤器2024-05-02 -
F1 概念车3（2011）2024-05-05
最热下载
-
未识别十字架006A，可嵌入盒（v2）2023-03-26 -
伊瑟宁加德骰子塔（奥斯坦克）2025-07-16 -
替换式膨胀喷嘴，适用于FLEXTAILGEAR小型泵。2024-03-18 -
Arduino或5V继电器控制板固定架2024-04-02 -
Woods Mower 30922 护盾保持者2024-04-24
最新模型
-
线框无心2024-05-08 -
Prime Line C1254 阳台门钥匙锁稳定器2024-05-08 -
通用徽章模型2024-05-08 -
WoodCrafters CD36P2-PW 门铆钉支撑架2024-05-08 -
ZOHD Dart 250电池托盘2024-05-06