火炮侧风器X2 - X轴线性轨道支架，用于StealthBurner和Orbiter V2.0

Artillery Sidewinder X2 - X Axis Linear Rail Mount for StealthBurner + Orbiter V2.0

2023-06-28 06:38:35

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

火炮侧风器X2 - X轴线性轨道支架，用于StealthBurner和Orbiter V2.0

Summary

I made this adapter for mounting a Voron Stealthburner to a Sidewinder x2 with linear rail mod, in order to print high grade materials, replacing the original parts and keeping them assembled.
The Voron Stealthburner has a great design and allows you to mount a huge variety of hotends.

https://github.com/VoronDesign/Voron-Stealthburner
Orbiter Stealthburner mount download https://github.com/elcrni/Voron-Mods/tree/main/Orbiter_2.0_SB_CW2_Enclosed
Orbiter mount tips and general infos https://www.orbiterprojects.com/orbiter-v2-0/

This design weights less than the original one, I suggest to print it with a CF material in order to resist at high temps if you are printing filaments that require it (PACF will be great), the most heated part is the lower one that gets closer to the heatbed in the first layers.
I made a first one made of petg, just to mount the Orbiter 2.0 and the Dragon Hotend, It worked fine but started to soften in the lower part during a 17h ABS print.
I suggest you to split the stl model and print the two parts indipendently, having the best possible quality, and planarity of the contact surface without any warping.

The pcb holder for the moment is the same as 3DBG Design, I had to increase the lenght of the spacer of 5mm because the cables where a bit pushed on the body. You can find it here: https://www.thingiverse.com/thing:5380374
I liked how patsp kept the lower V-slot wheel, having more precise printhead movements, but I moved the printhead a little bit higher to have it more balanced on the linear rail. https://www.thingiverse.com/thing:4597994

You will need:

x1 400mm Linear Rail MGN12H
x11 m3 threaded inserts, Ruthex has a really good build quality (insert lenght 5.7mm)
-x2 m3 short inserts for the original probe, or you can simply cut the "not threaded part" of the std, helping the insertion with a bolt as shown in the images
x7 m3x8 bolts for the plates and linear rail
x2 m3x25 bolts
2 plastic strips
I suggest you to buy a X belt tensioner, to make the belt tensioning process easier, this one has a good build quality https://www.amazon.it/dp/B096ZZSKWK?psc=1&ref=ppx_yo2ov_dt_b_product_details

Steps:

Insert all the threaded inserts
Connect the two plates with x3 m3x8 bolts
Mount the stock probe sensor
Connect the plate to the linear rail
Insert the bolt and the V-Slot Wheel with the eccentric nut, positioning it at the right distance
Attach the belt with the plastic strips and check the tension.
Follow the StealthBurner assembly instructions and mount the Printhead
Mount the pcb on the support, connect the cables and the screw it to the two inserts on the right.

The .stl is already the V2 design, the one in the pictures is the first prototype, now I improved some parts to make it lighter and stiffer, and improved some tolerances.
Any advice for further improvements is welcome. Hope you like it and find it helpful.

Print Settings

Printer brand:
Artillery
Printer:
Artillery Sidewinder X1
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
40%
Filament brand:
FiloAlfa
Filament material:
PA-CF
Notes:
PACF worked great with 40%infill, 0.2 layers with 0.4 nozzle, 4 perimeters and 4 top and bottom layers. The one in the images is printed on a Sidewinder X2 with StealthBurner, Orbiter 2.0 and Dragon Hotend.