SawStop 零清场插入式墙挂架

SawStop Zero Clearance Insert Wall Hanger

2023-06-28 06:38:35

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Here's a simple wall hanger for storing a standard SawStop zero clearance insert on a wall. Most SawStop owners have at least two of these (one for regular and one for dado setups). I have 3 (thin kerf, 3/32"; regular kerf, 1/8"; and dado), so nice to have safe place for the ones resting on the sidelines.

Print in the default orientation (countersunk side of the screw hole should be down on the build plate). No support is need needed. Use your favorite setting and plastic as nothing special is required (a couple of perimeters and a little infill). My prints were created on a Cel-Robox printer using Red PLA2 from FilaCube (closest color I had on hand to "SawStop Red").

Mount the hanger with a single screw (and anchor if necessary) to the wall. To hang an insert, simply slip the metal ring of the insert over the mount. The tab on the insert will lock into the recess in the mount so it can't slip off.