蠕虫球体

Scorpion Ball

2023-06-28 06:54:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Scorpion Ball

Welcome to the Scorpion Ball project! This fun, innovative venture allows you to create unique hollow spheres of ice that can be filled with any liquid of your choice. Ideal for parties, BBQs, or just to impress your friends!

Design Features

Scorpion Ball boasts a non-conventional design where each hemisphere screws together tightly, ensuring no leaks. Included in the design are two handy wrenches for torquing down the assembly. The project is fully 3D printable (supports are optional), except for a single 3.5" gasket (commonly found in water filter canisters) which ensures a tight seal.

Instructions

Here's how you can create your very own Scorpion Ball:

Print Each Part: This includes the bottom half, the inner shell, the outer shell, and the two wrenches. An infill of around 15% is recommended as the design benefits from being mostly hollow, allowing the sphere to freeze more evenly.
Sand the Bottom Half: Ensure that the mating surface of the bottom half is as smooth as possible.
Insert the Gasket: Place the 3.5" rubber gasket inside the groove located on the inner shell.
Assemble the Shells: Place the inner shell outside the outer shell.
Screw the Halves Together: Gently screw the two halves together using your hands, then use the included wrenches to apply additional torque.
Fill the Sphere: Fill the sphere via the hole in the top.
Freeze the Sphere: Place the sphere in your freezer. Every hour, poke a hole in the ice using a chopstick. This will keep the shell from exploding as the water freezes inside of it.
Unmold and Refill: After about five or six hours (the exact time depends on your freezer), turn the sphere upside down and drain the unfrozen water from the middle. Then, use a small funnel to refill it with a liquid of your choice.
Unscrew and Enjoy: Unscrew the shell and remove the ice sphere. Poke a straw through the hole in the sphere, hand it to a friend, and enjoy!