Cactus Container
2023-07-22 11:10:22
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A spikey little cactus container for your spikey little cactus!
See here for video: https://youtu.be/FG99xDI6KgU
See here for stable download: https://than.gs/m/905681
- For dual color printing, import the model into your slicer and assign your extruders to your selected materials. For single color printing, import and merge the models together in your slicer.
- Select “User Specified” Z Seam Position and enter coordinates for the center of the model. This ensures that the thorns start printing inside the cactus and not out in midair.
- For dual color printing, you will not need a prime tower; the extra bumps just add to the effect.
- The thorn geometry is 0.4mm high. I suggest a layer height of 0.2mm.
- To get the best thorns with your dual color prints, lower the speed of your thorn extruder and increase the flow rate. The model printing in the video shows the thorns printing at 10mm/sec at 300% flow rate.
See here for a similarly designed but much more disgusting “Zit Vase”:
Video: https://youtu.be/C6m6XKhYqII
Small: https://than.gs/m/903479
Medium: https://than.gs/m/903481
Large: https://than.gs/m/903483
Tags
License
CC BY-NC-SA
Cactus Container
by DaveMakesStuff is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
蝙蝠侠头盔、面具、面罩和耳朵 - 分割可打印部件设计2023-03-26 -
地球巨人（加入我们的 Patreon）2023-03-26 -
GoPro 镜头盖及容器2024-01-14 -
迷你足球台球桌2024-03-15
最热下载
-
Philips 马拉松 FC9225 轮子 飞利浦 Marathon FC9225 轮子2024-03-31 -
浴室排水器2024-04-07 -
法兰尺寸测量工具（小）2025-07-16 -
吸血鬼领主（免费D&D小模型）2025-07-15 -
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21
最新模型
-
MBX5 电池与 ESC 组合托盘2024-05-08 -
定制曼达洛人头盔附带曲奇切割器2024-05-08 -
白板记号笔支架（圆形磁铁附件）2024-05-06 -
铁人被击败了2024-05-06
