耳朵添加到死亡枪头罩
Ear Addition to Death Gun Mask
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
I was printed the half-mask but did not like the way it would've been worn. I added this part to allow a face mask string or similar material to go around the ear.
NOTE: My fusion 360 did not like me using the original mask as a template to get the base to line up with the cheek. You may have to SCALE THE MODEL DOWN TO 10.6% to match with the original mask size.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Rafts:Yes
- Supports:No
- Infill:15%
- Notes:
My fusion 360 did not like me using the original mask as a template to get the base to line up with the cheek. You may have to SCALE THE MODEL DOWN TO 10.6% to match with the original mask size. Also pls rotate so that the flat part is on the bottom.
Tags
License
Ear Addition to Death Gun Mask
by RampantRex55 is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
热门推荐
-
死亡之手2023-04-05
-
Qbrick 组织多功能插件 - 半深8格收纳插件2024-03-25
-
Hogwarts2024-04-21
-
闪耀的布鲁蒂克斯2024-04-30
-
电池适配器用于钻头性能型号PCD144-NZ,支持使用STHOR电池789862024-05-05
最热下载
-
Toyota 22RE发动机扩展套件2023-03-26
-
Wolf系列手机支架2025-07-16
-
Arduino或5V继电器控制板固定架2024-04-02
-
罗宾:不公正22024-04-07
-
线框无心2024-05-08
最新模型
-
指尖把玩2024-05-08
-
Gaggia压力计磁铁套装2024-05-08
-
1:400机场终端模型2024-05-06
-
经典俄罗斯方块2024-05-06
-
飞机EGT模型2024-05-06