小巧2英寸高品质计算机扬声器

Mini 2" Computer Speakers

2023-07-22 20:22:40

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

https://vimeo.com/847567987

This is a speaker enclosure I designed

You can resize it to fit any speaker really

If you do make this be sure to post a make so I can see yours and leave any suggestions so I can make it better

REQUIREMENTS:

Basic understanding of soldering/soldering iron

Drill with drill bits

super glue/ hot glue

2" full range speaker 3 to 10 watts (anything over 10 watts is overkill and under 3 watts sounds bad)

amplifier depending on how many watts the speakers are, USB or battery powered is ideal

Speaker wire

spray paint (optional step, see directions)

Directions:

glue the two halfs of the enclosure together, OPTIONAL STEP: spray paint the enclosure the color you want it to be, I just did this because sometime the super glue will bleach the color of the PLA, then I drilled a hole to about 2-3 times the thickness of the wire this will act as a way to connect the speakers / as a port, next stick the wires from the amplifier into the hole you drilled then soilder them with the correct polarities then glue the speaker in to the enclosure making sure not to break the connections and to encure that I glued the wire down to the enclosure. before you glue in the speaker test it to make sure the driver and connections work.