共享空间饮料持有者

Shared Space Beverage Holder

2023-07-23 11:55:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is an early beta of my take on a shared space beverage container, as seen on the space adventure experience at a popular theme park. Vague enough? Cool!

This is an early test.

It's designed to be usable for a drink. The glasses and straws are properly food safe. Your beverage should never touch anything 3d printed, but I made no guarantees about your safety if using this for actual food.

Personally, I plan to be sure to really thoroughly clean out the interior so no loose plastic bits end up in my drinks, and to give a good several weeks of curing for the paint before I use it.

It is built around these items:

Glow cubes: https://a.co/d/2oAMEW6 (seem to be same brand as the parks even!)
16 oz. glass tumblers: https://a.co/d/8aQSRRm
28" long bendy straws: https://a.co/d/12euzyg

This project also uses:

A few 3mm heat set inserts: https://a.co/d/dryg5lg
A few 3mm screws: https://a.co/d/7rvgjBf
6mm rod for the center of the handle: https://a.co/d/1Qkt9s8
Some of these as alignment posts: https://a.co/d/gdszPK4 (or you can print the pin included in the files)

For filament, Overture Space Grey looks really good: https://a.co/d/fpVMu1I

The plan right now is to print this in "space grey" filament, and coat it with food safe epoxy. The goal is no filler / paint since it is meant for a tasty space beverage.

I will share instructions once this gets out of beta. But, a few people asked about test prints, so here we go!

V2 Came and went pretty quickly. We won't talk about that.

V3 Uploaded on July 25.

Split the top section into multiple pieces for easier printing and cleanup
Adjusted the size of the top handle / screw cap
New threading style for the base

Final

There are 2 versions of the top piece: a single file with the whole thing, and a split version (top a, b and c). The full one prints without seams but has some really bad overhangs at the bottom and requires a ton of support. You can do whichever one you prefer.

Fixed the link to the glasses and straws

v1.1

I added a 3d printed pin for helping to align the parts. This is especially useful for connecting base-a and base-b. For those I use 2 part epoxy to glue the parts together, and the pins for alignment. Once it is cured, I cut the pins flush to the top surface of the base with a sharp razor.

To assemble the handle, cut a section of the 6mm rod to around 80mm (a little shorter is better than a little longer). Fit that through the 3 pieces of the handle before screwing it down, and use a bit of epoxy/glue of choice for extra strength if desired.