奥尔克兹书签
ORKZ BOOKMARK
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
While reading my new warhammer40k book, I found myself needing a bookmark - So I put together this thematic model and figured some of you might like it as well, ya' know cuz orkz is best and all.
It comes in two versions - klassik and one with proper jawz.
By default the bookmarks are 1.5mm thick and the longest one is 160 mm long. But can easily be changed in any 3D software.
I'm in no way affiliated with GW and do not endorse any reselling and derivations, all intended for noncommercial/personal use.
Print Settings
- Printer brand:
Prusa
- Printer:
I3 MK3S
- Resolution:0.2mm
- Infill:15%
- Filament brand:
Prusament
- Filament material:
PLA
- Notes:
3D PRINTING SETTINGS
Printed at 0.2mm with filament change above 1mm height. No supports. (Used layer ironing setting with the orange bookmark).
Can as well be printed on an SLA printer, probably needs scaling, dont forget to scale only on X and Y axes, because you dont want to go with the thickness lower than 1mm.
Tags
License
ORKZ BOOKMARK
by ResinPeasant is licensed under the Creative Commons - Attribution - No Derivatives license.
相关内容
联系我们
热门推荐
-
户外单元安装3D模型2023-03-26 -
40mm立方体测试对象2023-03-27 -
额外零件用于20毫米挤出链条2023-06-19 -
300毫升Marinelli型号试管，适用于Radex Obsidian2024-04-04 -
安迪门打印机 Ender 3 V3 SE 侧边安装丝盘支架 + 导线导引装置改进版2024-04-09
最热下载
-
Dado - 立方体模型2024-03-24 -
GLOCK 17（第三代）蓝枪2024-04-13 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
一体打印活动关节熊猫和支架2025-07-25 -
任意立方体活动关节的一体打印外星人2025-07-19 -
巴黎卢浮宫的三圣母像2025-07-16
