德威特夹持架 - 倾斜式

DeWalt drill and hammer drill driver holder - slanted

2023-07-25 00:10:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I own a pair of DeWalt drills. One standard brushless drill that you see holders for all over this site and another DeWalt hammer drill. I printed cwienands double holder which was awesome, but the hammer drill is a bit wider and required a larger hole. Thus, I expanded the holder on the right to fit the hammer drill or one of the older DeWalt drills.

After completing this, I was a bit concerned of the drill sliding out so I added a slight wedge to prevent this. I didn't want to spend another 10 hours printing a whole other holder, so on mine I just printed the additional wedge. If I get bored and want to spend another $5 on material, maybe I'll print a single piece unit, but the additional wedge seems to work fine.

FYI, this wedge will not work on cwienands as again I have expanded the holder to fit the hammer drill. I'll try and find some time to make a wedge for the original as well.