1st Gen迷你库尔手机支架适用于iPhone 13 Pro Max

1st Gen Mini Cooper Phone Holder For iPhone 13 Pro Max

2023-07-25 04:38:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Made to be compatible with first generation Mini Coopers that have a factory sat nav installed. The printed part replaces the OEM ring trim around the sat nav. designed to hold an Iphone 13 Pro Max, however it may also work with the 12 Pro max and 14 Pro Max. Its recommended that you print in PETG or any other material that can withstand high temperatures during the summer.

Some people may find that installing a phone into the grips is a little tight, this can easily be rectified by sanding the edges of the grips a small amount. (Seems this might be the case for everyone, I apologise)

The trim is designed to be pressure fit over the lip that can be seen once you’ve removed the OEM trim, but you may find that a bit of adhesive or tape on the lip for a tighter fit is necessary.