20号散弹壳包复制品与快扣盖子

20 Gauge Shotshell Pack replicas and snap caps

2023-07-25 05:04:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A 20 gauge shotgun shell, also known as 20ga or 20G shotshell, is a centerfire shotgun cartridge. Centerfire shotgun shells were designed in the mid 1800s.

Includes 2 lengths: 2 3/4in (most common, 2.75in, 62mm), and 3in (68mm).

Note: Shotgun shells are measured by the total length of the uncrimped/unfolded shell. The actual length of a loaded 2 3/4 inch shell is around 2.5in.

Print this for props, display, education, training, or just because it's cool.

Contains 9 files:

Accurately sized replicas: 20ga_2.75in_cartridge.stl, 20ga_3in_cartridge.stl
Separate brass head and case pieces for easily printing in different colors: 20ga_2.75in_head.stl, 20ga_2.75in_case.stl, 20ga_3in_head.stl, 20ga_3in_case.stl
Snap cap/dummy rounds for cycle and dry fire practice, with firing pin hole and reduced case size: 20ga_2.75in_snapcap.stl, 20ga_3in_snapcap.stl
Information txt file with recommended print settings: 20ga_pack_info.txt

If you like this model, please consider donating: https://paypal.me/spearmountain

Print Settings

Notes:
- Material: Tested with PLA and PLA+/PLA Pro.
- Overall print size: 68.4mm tall (3in cartridge), 19.46mm diameter.
- Layer Height/Quality: 0.16mm or less recommended, 0.12mm works best.
- Infill: 20% is fine for display, 30% or more recommended for snap cap use.
- Print Speed: 50mm/s or less recommended. I do 40mm/s overall speed and 10mm/s initial layer speed.
- Adhesion: A brim might be needed, depending on the printer and bed type. I have a textured PEI bed, and with proper calibration, additional adhesion isn't needed.
- Post print: The pieces may require some sanding or filing for proper fitment if the bottom layers bulged out a little. Fitment should be a little snug, but easy to take in and out. A properly calibrated setup shouldn't need additional work.