3D模型钥匙链

OBX keychain

2023-07-25 17:53:17

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

North Carolina Highway 12 (NC 12) is a 148.0-mile-long (238.2 km) primary state highway in the U.S. state of North Carolina, linking the peninsulas and islands of the northern Outer Banks.

This Highway sign logo is in every souvenir shop along slow corridor through Duck, Nag's Head, and Kitty Hawk & the beach houses. I thought it would be a fun project to give my sister a Rt. 12 keychain as a memento of the vacation our family had on the Banks.

To get the keychain super smooth (as the scale is quite small) I used the Prusa Slicer, and enabled ironing. I've included a white and black .gcode with ironing enabled for those with Ender3 printers. (The filament I used recommends 220, so adjust on first layer if needed.)

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
.12
Infill:
50%
Filament brand:
Duramic PLA Plus
Filament color:
Black & White
Filament material:
PLA
Notes:
Print out parts.
Clean up the white ring I had to very glently sand off a corner "blob" or two. 3 passes with 120 grit sand paper very gingerly so as not to bend the part.

Super glue & snap together. I also clamped using quick clamps while it dried.
*to glue the white ring, I squirted some super glue onto a waste piece of plastic and spread it thin, the put the white ring in the smear just gluing the bottom edge.
I dry fit everything first to make sure it fit. & sanded as needed. Use a little tiny screwdriver to gently get the white ring back out. (it may not need glue depending on your fit)