Kanto Pokedex 任天堂Switch 游戏盒子（免费）
Kanto Pokedex Nintendo Switch Game Case (Free)
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
UPDATE: As of 11/21/2023 I have done a small bit of redesign to the model.
- Cleaned up topology and smoother edges all around
- More "snug" fit for game cartridges
- Corrected sizing of "Silver Ring" insert on *Printable Parts Version for a more snug fit
- Added some room to the left of the Door with Indents. Triangle has been moved over slightly for optimal printing
- Changed design of game notches to adhere better to the base of the model
THIS PRINT HAS A FREE & PAID VERSION! FILES MARKED WITH * ARE ONLY INCLUDED IN PAID VERSION!
Designed to fit 18 Nintendo Switch Games and 2 microSD cards. Each slot made an tested to hold your games snuggly! WON'T FALL OUT!
Three versions: Print-at-Once Version, The "Printable-Parts Version, and finally the Flat Version.
Want the paid version? Get it here! Only $0.99!>
https://cults3d.com/en/3d-model/game/kanto-pokedex-nintendo-switch-game-case-paid
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:No
- Resolution:0.12
- Infill:20%
- Notes:
Printer: Ender 3 2021 (Stock)
Nozzle: 0.4mm
Resolution: 0.12mm
Infill: 20%
Brim: No
Raft: Yes (Best used for parts with SHARP CORNERS) Door, Base, Triangle
NO RAFT NEEDED FOR: Silver Ring Insert, Small LED, or Large LED.
Support: No
Recommended Print Speed: Initial Layer: 30mm/s - After: 50mm/s (My personal settings!)
*Pokedex Kanto Switch Cartridge Case (Complete) - 116g
Time to Print: 22hrs & 43 mins (w/Ironing: 1 day, 2 hrs & 25 mins)*Pokedex Kanto Switch Cartridge Case (Printable-Parts)- 114g
Time to Print: 22hrs & 48mins (w/Ironing: 1day, 2hrs & 34mins)Pokedex Kanto Switch Cartridge Case (Flat) - 115g
Time to Print: 22hrs & 22mins (w/Ironing: 1day, 2hrs &6mins)I recommend enabling Ironing if you're using Cura for a smooth finish!
Tags
License
Kanto Pokedex Nintendo Switch Game Case (Free)
by LeanPrints is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
多尖锐的岩石2023-03-26 -
GPD Win 2 高性能3D工作站2023-04-30 -
山羊/精灵族/魔鬼角 - 可拧上或穿过发丝2024-04-05 -
多板结构胶带夹持器2024-04-30 -
洛伊丝·格里芬模板22024-05-03
最热下载
-
全能3D打印机测试2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
GMX曲线支架支持GoPro安装（或轻型结构）2023-05-22 -
Metabo SXE450 真空连接器（适用于Bosch Advanced VAC20）2024-01-11 -
Dado - 立方体模型2024-03-24
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
HGX lite v2支架2025-07-18 -
性感美女3d人像（带基座）2025-07-17 -
大码动漫女战士2025-07-15 -
原神优菈2025-06-27