太阳火焰2替代轮轴版本2

SUNFIRE 2 ALTERNATE PULLEY VERSION 2

2023-07-25 21:02:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

ALTERNATE PULLEYS FOR THE SUNFIRE 2 CONE WINDER. THESE REPLACE VARIOUS PARTS.

PETG OR ABS ONLY. IF MADE WITH ANY OTHER MATERIALS THAT WILL BE CONSIDERED A DERIVATIVE.

PRINTING NOTES
INVERT THE SMALL CONE DRIVE PULLEY FOR PRINTING
PRINT ALL PARTS AT SAME TIME USING ONE ROLL OF FILAMENT. 2 LARGE PULLEYS AND ONE EACH OF THE OTHERS. DO NOT MIX WITH PARTS MADE AT DIFFERENT TIMES OR MIX WITH PARTS FROM ORIGINAL POST.
A PAUSE IS REQUIRED TO INSERT 6-32 HEX NUTS IN THREE OF THE FOUR PARTS TO BE PRINTED AT SAME TIME.
THE OVERHANGS ARE SEVERE BUT IT IS POSSIBLE TO PRINT WITHOUT SUPPORTS. IF YOU NEED SUPPORT USE THE ORIGINAL VERSION PULLEYS.
PERIMETERS 3 UOS
LAYER HEIGHT .2 UOS
BOTTOM 3 LAYERS
TOP 3 LAYERS
INFILL 30% RECT
HEIGHT 5.5-9.8mm .1 LAYER HEIGHT
FOR SMALL SCREW DRIVE AND LARGE PULLEYS 9.8-26mm 100%PERIMETERS