Nucking Futs TPU-01 加厚机身

Nucking Futs TPU Fuselage01 / Nose Thickened

2023-07-26 02:27:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Thickened Fuselage01 modified using Blender to make it strong enough to be printed from TPU. Also increased motor mount thickness and made cut out for xt30 and motor wire to passthrough the front.

Recommended version: Fuselage01_TPU_Thick_4.5walls

Made multiple wall thicknesses from floppy to very rugged (too rugged). I tried 6walls version it was too rugged so tried 4.5walls and it was good but it would buckle on crash. For that 4walls or even 3.5walls would be preferable but I don't know if it would be stiff enough

Mesh is not perfect have small problem but doesn't really matter when printed