伊利克斯空调 EXP26U338CW 双管转换（复杂）
Electrolux AC EXP26U338CW dual hose conversion (complexe)
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Project contains the inlet back pannel in one piece for you to adapt any kind of tube you might have and 3 files containing my adaptation of an 150 mm tube, split in two parts for easy printing on my small printer and 3 half pegs to help join the two parts. The air filter included in the original grill fits perfect in the adaptation.
The mesh has a small defect around the screw hole, but it prints ok in Cura 5.2.1 with Union Overlapping Volumes ON, Remove All Holes OFF, Extensive Stitching ON, Keep Disconected Faces OFF, Remove Mesh Intersection ON, Alternate Mesh Removal ON
The box included is for a master-slave device, to start a push fan for the inlet hose. Since I'm using a softer and longer hose for inlet, I added this fan. I used a 12V DC source (https://www.sigmanortec.ro/modul-sursa-xh-m302-ac-dc-220vac-la-12vdc-12v-250mah-3w) and a current protection module (https://www.sigmanortec.ro/modul-protectie-supracurent-5a-reglabil-cu-releu-12vdc) with relay to switch the fan on when the AC was in use. I used more kapton tape pieces on the back of the relay, since it was unprotected.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:Yes
- Supports:Yes
- Resolution:1.20
- Infill:0
- Filament brand:
creality
- Filament color:
white
- Filament material:
PLA
- Notes:
2 mm walls (5 lines x 0.4 mm)
License
Electrolux AC EXP26U338CW dual hose conversion (complex)
by BagdaKiller is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
One Tier Card Holder2023-05-13 -
GUY AA 装甲车2024-01-05 -
Heroscape桥墙2024-01-10 -
手机和平板支架套装2024-03-17 -
gba 游戏 任天趣 红蓝机 插入卡带2024-04-22
最热下载
-
全能3D打印机测试2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
Metabo SXE450 真空连接器（适用于Bosch Advanced VAC20）2024-01-11 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
戴森V6真空吸尘器配件壁挂支架2025-07-17 -
泡泡底拖鞋2025-07-17 -
KALYRA PRIME - 一姐 适合桌面游戏和收藏家的科幻女英雄。2025-07-15 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24